English
français
Español
العربية
Have Any Questions About Meddo?
Contact Us Now!
Various areas of application place different demands on the technology. The CAP201 MRI is designed with non-magnetic components. Thus, it can be used in magnetic fields of 1.5 to 3 Tesla. The measurement signal of the CAP201 is not affected even by strong high-frequency gradients. Whether it’s measurement accuracy, resistance to environmental conditions, weight or flexibility in assembly - upon request, we can customize the capnography module to make it easier for you to integrate it into your technology. We offer optimized versions for all common areas of application.
Specification | Values |
Suitability for MRI | 1.5 T and 3 T environments with up to 250 mT at the module |
Measurement range: | 0 vol% to 16 vol% |
Measurement accuracy: | 0 vol% to 8 vol%: ± (0.26 Vol % + 5 % of real concentration) |
CO2 value output rate: | 8 Hz or 40 Hz (selectable) |
Rise time T10-90: | < 150 ms @ 80 ml / min |
Start-up time (warm-up): | < 5 s |
Power consumption | ~ 1.0 W (+ 0.3 W with pump) |
Size of board: | 70 mm x 40 mm x 26 mm (LxWxH) |
Weight: | 69 g (incl. pump) |
can be used in MRI environments up to 3T
High accuracy sidestream CO₂ measurement
Low energy consumption and small footprint
Calculation of fiCO₂, etCO₂ and breathing rate
Compensation of aging and environmental effects
Occlusion and breathing detection
No recalibration in field required
